Home page

G101

The product is widely used for testing various parameters of high-frequency electronic transformers, inductors, coils, capacitors, resistors, magnetic materials and other components

Category:

Precision LCR digital bridge

Keywords: electronic testing instruments

MESSAGE

Product Details

main feature

●Test frequency: 100(120)Hz/1KHz

●Basic accuracy: 0.2%

●Single function key, clear LED display, easy-to-operate center value setting percentage display

Specification Table

model	101
Test parameters
Main display	Inductance (L), capacitance (C), resistance (R)
Secondary display	Quality factor (Q), loss factor (D), resistance (R)
Test signal
Test voltage	0.25V/1.0V
Test frequency	100Hz(120Hz),1kHz
Frequency accuracy	±0.25%
Output impedance	Depends on different measurement gears
	10Ω, 1KΩ, 100KΩ, suitable for 0.25V test level (level)
	10Ω, 100Ω, 1KΩ, 10KΩ, 100KΩ, suitable for 1V test
	Level (level)
Measurement display range
Main parameter	L:0.1μH～9999.9H
	C:0.1pF～99999μF
	R:0.0001Ω～99.999MΩ
Secondary parameter	Q:0.0001～999.9
Secondary parameter	D:0.0001～9.999
Basic accuracy	0.2%
Measuring speed (1KHz)
fast	6meas./sec
Medium speed	3meas./sec
Slow	1meas./sec
trigger	Internal/external (manual)
monitor
L.C.R	5 digits
Q.D.R	4 digits
Equivalent circuit mode	Series Parallel
Applied bias	DC:0～35V
Correction function	Zero
Judgment method	Good product/bad product judgment of each test parameter
General specifications
Operating environment	Temperature: 10°C～40°C, humidity: 10%～90%RH
Power consumption	Maximum 55VA
Power requirement	90V～125V or 190V～250V, 48Hz～62Hz
weight	About 4Kg
Dimensions (width × height × depth)	270×105×350mm

Performance characteristics
4.3 inch color screen display,
Test frequency: 50Hz to 200KHz, any setting (2818A only)
Test frequency: 50Hz to 200KHz, with 37 fixed frequency points (2818B) available for selection
Test level 10mV~2V, 10mV step by step (when the internal resistance is 10 Ω, the highest set voltage is 1V)
Basic accuracy 0.05%
High speed and efficient measurement: up to 32 times/second
Load correction: Calculate and correct the required test data based on specific samples and parameter instruments.
Comparator function: After setting one or more range values of product measurement project parameters, the instrument can compare the obtained measurement values with the set values to determine whether it is a qualified or defective product.
Real time recording of measurement results, accompanied by relevant information such as measurement date, product measurement data file name, and statistics of the number of measurements per day, ensures that the on/off data is not lost
File management function: can store 100 sets of product testing data
Sorting function: subdivide the product into levels, and cooperate with the control mechanical sorting system to sort and classify the products.
V, I test signal level monitoring function
■ Can scan and measure up to 8 frequencies or 8 voltages, while displaying measurement results
Communication interface: RS232C/HANDLER

G2818A/G2818B

G1063

G101

Message