Home page

G502BC

The product is widely used for testing various parameters of high-frequency electronic transformers, inductors, coils, capacitors, resistors, magnetic materials and other components

Category:

Micro resistance tester

Keywords: electronic testing instruments

MESSAGE

Product Details

Introduction

GKT502BC DC resistance meter is used to measure the copper resistance of transformers and other coil products. It can be widely used for low resistance measurement of switches, switching power supply transformers, continuous appliances, motors and PC circuit boards. It has good and bad product judgment functions. It is a production line or The best resistance measuring instrument for quality control department.

main feature

●Basic test accuracy: 0.05%

●Single function key, clear LED display, simple operation

●Good/bad product identification

Specification Table

model	502BC
Test Range	10μΩ～1.9999MΩ divided into nine test files
Test accuracy
10μΩ ～ 199.99mΩ	±0.1%±2counts
200mΩ ～ 1.9999kΩ	±0.05%±1counts
2KΩ ～ 199.99kΩ	±0.1%±2counts
200KΩ ～ 1.9999MΩ	±0.5%±2counts
Measuring speed
fast	11meas./sec
Slow	7meas./sec
Judgment method	Good/Defective Product Judgment
Display method	41/2 digits
Correction function	Zero
trigger	Internal trigger, external trigger, manual
General specifications
Operating environment	Temperature: 10°C～40°C, humidity: 10%～90%R
Power consumption	Max 30VA
Power requirement	90V～125V or 190V～250V, 48Hz～62Hz
weight	About 4Kg
Dimensions (width × height × depth)	270×105×350mm

Order items

﹒ Gainkaita 502BC · Four-terminal test line · SMD test line

Performance characteristics
4.3 inch color screen display,
Test frequency: 50Hz to 200KHz, any setting (2818A only)
Test frequency: 50Hz to 200KHz, with 37 fixed frequency points (2818B) available for selection
Test level 10mV~2V, 10mV step by step (when the internal resistance is 10 Ω, the highest set voltage is 1V)
Basic accuracy 0.05%
High speed and efficient measurement: up to 32 times/second
Load correction: Calculate and correct the required test data based on specific samples and parameter instruments.
Comparator function: After setting one or more range values of product measurement project parameters, the instrument can compare the obtained measurement values with the set values to determine whether it is a qualified or defective product.
Real time recording of measurement results, accompanied by relevant information such as measurement date, product measurement data file name, and statistics of the number of measurements per day, ensures that the on/off data is not lost
File management function: can store 100 sets of product testing data
Sorting function: subdivide the product into levels, and cooperate with the control mechanical sorting system to sort and classify the products.
V, I test signal level monitoring function
■ Can scan and measure up to 8 frequencies or 8 voltages, while displaying measurement results
Communication interface: RS232C/HANDLER

None

G502 series

G502BC

Message