Home page

G310

The product is widely used for testing various parameters of high-frequency electronic transformers, inductors, coils, capacitors, resistors, magnetic materials and other components

Category:

Coil tester

Keywords: electronic testing instruments

MESSAGE

Product Details

Introduction

GKT310 turns and phase tester can be used in transformer manufacturing plants, radio cassette recorders, televisions, complete machine manufacturers or related scientific research units, as a test instrument for product acceptance, inspection, and sample analysis. It has 100 sets of internal instrument settings to reduce repeated settings. The time for setting parameters will be the best auxiliary tool for you to improve product quality and work efficiency.

Performance characteristics

■Test frequency: 1KHZ, 15.75KHZ, 20KHZ, 50KHZ

■ Gainkaita 310

■310 pairs of clamping wires

■Basic test error: 0.5%

■310Box Jumper Board

■100 sets of internal instrument settings can be stored and recalled

■310 Big Needle Fixture

■Custom-made fixtures of special specifications

■20-foot scanning function

■ 310 small jig

■Determination of Good/Defective Products

technical parameter

model	310
Test parameters	(Primary coil Np, secondary coil Ns) (primary coil voltage Vp, secondary coil voltage Vs)
Test parameters	(Primary coil Np, secondary coil Ns) (secondary coil Ns, primary coil Np)
Test signal
Test voltage	0.1V～10V, ±10%, 0.1V/step programmable
Test frequency	1KHz15.75KHz,20KHz,50KHz
Measurement display range	0.01～9999.9 circles
Basic accuracy	±0.5%
Measuring speed (1KHz)
fast	5meas./sec
Slow	2.5meas./sec
Judgment method	Good/Defective Product Judgment
Display method	41/2 digits × 2
Store/call	100 sets of instrument settings
trigger	automatic / manual
General specifications
Operating environment	Temperature: 10°C～40°C, humidity: 10%～90%RH
Power consumption	Max 100VA
Power requirement	90V～125V or 190V～250V, 48Hz～62Hz
weight	About 8Kg
Dimensions (width × height × depth)	405×130×365mm

Performance characteristics
4.3 inch color screen display,
Test frequency: 50Hz to 200KHz, any setting (2818A only)
Test frequency: 50Hz to 200KHz, with 37 fixed frequency points (2818B) available for selection
Test level 10mV~2V, 10mV step by step (when the internal resistance is 10 Ω, the highest set voltage is 1V)
Basic accuracy 0.05%
High speed and efficient measurement: up to 32 times/second
Load correction: Calculate and correct the required test data based on specific samples and parameter instruments.
Comparator function: After setting one or more range values of product measurement project parameters, the instrument can compare the obtained measurement values with the set values to determine whether it is a qualified or defective product.
Real time recording of measurement results, accompanied by relevant information such as measurement date, product measurement data file name, and statistics of the number of measurements per day, ensures that the on/off data is not lost
File management function: can store 100 sets of product testing data
Sorting function: subdivide the product into levels, and cooperate with the control mechanical sorting system to sort and classify the products.
V, I test signal level monitoring function
■ Can scan and measure up to 8 frequencies or 8 voltages, while displaying measurement results
Communication interface: RS232C/HANDLER

None

G310

Message