PRODUCTS
PRODUCTS
PRODUCTS CENTER
republic of south africa G2818AL/G2818BL
Category:
republic of south africaFilter balance tester
Product Description
Introduction
GKT2818XL series precision precision balance analyzer has high accuracy, high stability, fast test speed, wide test range, and large data storage space. It is an impedance measuring instrument that can easily compare and test balance devices, such as integrated voltage divider resistors and balance capacitors. And common mode filter. It uses an advanced 32-bit microprocessor and a 4.3-inch color display. The interface menu design is user-friendly, and the operation is convenient and quick. It can perform routine, comparison, sorting, and scanning measurements, and can save or read test data and related content in large capacity. It provides a basis for users to control product quality and analyze product characteristics, and greatly meets different testing needs of users; at the same time, the instrument also provides Handler interface and RS-232C serial communication interface for automatic measurement, remote control, and data transmission. Condition.
Performance characteristics
■ Efficient balance test function
■ Phase function: broken wire and cross wire detection function
■ 4.3 inch color screen display,
■ Test frequency: 50Hz to 200KHz, arbitrarily set (only 2818AL)
■ Test frequency: 50Hz to 200KHz, 37 fixed frequency points can be selected (2818BL)
■ Test level 10mV ~ 2V, 10mV stepping (when the internal resistance is 10Ω, the highest setting voltage is 1V)
■ Basic accuracy 0.05%
■ High-speed and high-efficiency measurement: the fastest 32 times per second
■ Load correction: According to the specific sample and parameter instrument to calculate and correct, get the required test data.
■ Comparator function: After setting one or more sets of range values of product measurement parameters, the instrument can compare the obtained measurement value with the set value and judge whether it is a qualified product or a defective product.
■ Real-time recording of measurement results, with measurement date, product measurement data file name, statistics on the number of measurements in a day and other related information, the data will not be lost when the machine is turned on and off
■ File management function: 100 sets of product test data can be stored
■ Sorting function: to subdivide the product level, cooperate with the control mechanical sorting system to sort and classify the products.
■ V, I test signal level monitoring function
■ DCR DC resistance test function (2818AL)
■ Up to 8 points of frequency or 8 points of voltage can be scanned and measured, and the measurement results can be displayed at the same time
■ Communication interface: RS232C/HANDLER
General specifications
| temperature humidity | 0 ° C - 40 ° C, 90% RH | |
| Power requirements | Voltage | 200-240V |
| frequency | 60Hz | |
| Power consumption | ≤60 VA | |
| Dimensions (W×H×D) | 300mm×120mm×360mm | |
| weight | About 3.5kg | |
technical parameter
| Measurement function | ||
| Measurement parameters |
Ls-Q， Ls-Rs， Lp-Q， Lp-Rp， Cs-D， Cs-Rs， Cp-D， Cp-Rp， Z-deg， Y- deg， R-X， G-B DCR （2818AL) |
|
| BL (main parameter balance) | ||
| Basic accuracy | 0.05% | |
| Test speed | Fast speed: 32, medium speed: 9, slow speed: 4 (times/sec) | |
| Equivalent Circuit | Series Parallel | |
| Trigger method | Internal, manual, external | |
| Correction function | Open/short circuit, full frequency clear, single point frequency clear | |
| monitor | 4.3 inch color screen | |
| Memory | Internal 100 groups, external U disk multiple groups | |
| Test signal | ||
| Test frequency | G2818AL | 50Hz – 200KHz, resolution: 10mHz |
| G2818BL | 50Hz -200KHz, 37 common frequency points | |
| Output impedance | 10Ω, 30Ω, 100Ω | |
| Test level | 10mV ～ 2V, resolution: 10mV | |
| Measurement display range | ||
| Z, R,X | 0.01mΩ ～ 9999.99MΩ | |
| Y, G, B | 0.01nS～999.999S | |
| C | 0.00001pF ～ 9999.99mF | |
| L | 0.01nH～9999.99H | |
| D | 0.00001 ～ 9.99999 | |
| θ (Deg) | -179.9° – 179.9° | |
| Q | 0.00001 ～ 99999.9 | |
| DCR | 0.1uΩ ～ 2MΩ | |
| Comparator and interface | ||
| Comparators | 9 grades sorting | |
| PASS/FAIL | ||
| interface | RS232C / HANDLER | |
Ordering Information
G2818AL precision balance tester
G2818BL Precision Balance Tester
Instrument accessories
Filter balance test fixture
Four-terminal Kelvin test cable
Optional accessories
SMD component test fixture
SMD test clamp
Four-terminal test fixture
Data acquisition software
Shenzhen Gain KaiTa Electronics Co., Ltd.
Email：xcc0310@gkt.com.cn
Fax：0755-27882561
Address: 3rd Floor, Block A, Building B2, Anle Industrial Zone, No.172 Hangcheng Avenue, Baoan District, Shenzhen
Follow us
CopyRight © 2023 Gain KaiTa