PRODUCTS

PRODUCTS

PRODUCTS
G3252/G3302
G3252/G3302

Seychelles G3252/G3302

Category:

SeychellesHigh frequency LCR digital bridge

Phone:0755-27882457

Inquire

Product Description

Introduction

 

Model GKT3252/3302 transformer tester is a high-stability, high-reliability precision measuring instrument, which is provided to the production line or quality control of transformer factory for import and export inspection. Technically, the ability to enhance the turns ratio can be used to solve the problems of low coupling coefficient, transformer turns ratio, turns measurement, etc., so that the measurement results can be more accurately determined. In addition to providing you with the test function of transformer scanning, 3252/3302 also has the LCR measurement function, which is not only easy to operate, but also reduces the cost of production equipment.

 

Performance characteristics

■Test frequency: 20Hz-200KHz/1MHz, accuracy 0.02%

■Large LCD display (320×240 dot matrix)

■Basic measurement accuracy: 0.1%

■Provide various standard test fixtures and customized special fixtures

■3 sets of impedance output mode selection, the measurement results can be completely compared with the LCR meters of well-known manufacturers

■Four-terminal test fixture, can get DCR, inductance and turns ratio accurate and stable measurement

■Accurate measurement of enhanced turns ratio, suitable for magnetic cores with low permeability

■Built-in comparator, 10-level classification and counting function (only applicable to 3252/3302)

■High-speed LCR measurement, the fastest 80 times per second

■4M SRAM memory card for machine data setting and backup

■High-speed DCR measurement, the fastest 50 times/second

■Standard RS-232, HANDLER and PRINER interface

■Direct control function of bias current source (only applicable to 3252/3302)

■50 sets of internal instrument settings can be stored and recalled

 

Specification Table

model 3252/3302
The main function Transformer scan test + LCR test
Test parameters
Transformer scan test Tnrn Ratio, Phase, Turn, Inductance (L), Quality Factor (Q)
Leakage inductance (LK), balance (Balance), AC resistance (ACR), capacitance (Cp), DC resistance (DCR)
Pin Short
LCR test Inductance (L), capacitance (C), resistance (R), absolute value of impedance (|Z︱), impedance
Admittance (Y), DC resistance (DCR), quality factor (Q), loss factor (D)
Resistance (R), reactance (X), phase angle (θ)
Test signal
Test voltage Turn 10mV～10V,±10%,10mV/Step
other 10mV～2V,±10%,10mV/Step
Test frequency Turn 3252；1KHz-200KHz,±0.02%
3302; 1KHz～1MHz, ±0.02% resolution: 0.01Hz
other 3252；20Hz-200KHz,±0.02%
3302; 20Hz～1MHz, ±0.02% resolution: 0.01Hz
Output impedance Turn 10. When the test level is less than or equal to 2V
50, when the test level>2V
other Constant=OFF; depends on the resistance range
Constant=320×：100Ω0.5%
Constant=107×:25Ω±0.5%
Constant=106×:50Ω100mA±0.5% (1V setting)
Inductive load is less than 10Ω, 10Ω±10%, impedance ≥10Ω
Measurement display range
L.LK 0.00001μH～9999.99H
C 0.00001pF～999.999mF
Q.D 0.00001～99999
Z.X.R 0.00001Ω ～ 99.9999MΩ
Y 0.01nS～99.9999S
θ -90.00～+90.00
DCR 0.01mΩ ～ 99.999MΩ
Turn 0.01～99999.99 circles (the secondary voltage is less than 100Vrms)
Pin-short 11 groups, between pin and pin
Basic accuracy
L.LK.CZXYRDCR 0.1% (if AC parameter is 1KHz)
Q.D 0.0005(1KHz)
θ 0.03°(1KHz)
Turn 0.5%(1KHz)
Measuring speed (fastest)
L.LK.CZXYRD 80meas./sec
DCR 50meas./sec
Turn 10meas./sec
Judgment method
Transformer scan test The good product/defective product judgment of each test parameter is output by the optional processor interface
LCR test The 10-level classification and total count are output by the optional processor interface
Good/bad product judgment is output by the standard processor interface
Display correction function 320×240 dot matrix LCD liquid crystal display
Open/Short return to zero, load correction
Memory 50 sets of instrument settings, which can be expanded by memory card
Equivalent circuit mode Series Parallel
trigger Internal, manual, external
General specifications
Environmental conditions Temperature: 10°C～40°C, humidity: 10%～90%RH
Power consumption 140VA max
Power requirement 90V～125Vac or 190V～250Vac, 48Hz～62Hz
weight About 8.5Kg
Dimensions (width × height × depth) 430×180×320mm

 

previous page:

Seychellesnone

SeychellesG3812/G3815

: next page