PRODUCTS
PRODUCTS
PRODUCTS CENTER
Marshall Islands G502 series
Category:
Marshall IslandsMicro resistance tester
Product Description
Brief introduction
G502 series is a new generation of practical multi-functional, wide test range and high-precision DC resistance tester, integrating the current mainstream technology and practical functions in the field of resistance testing, with its excellent performance, convenient operation, high efficiency and reliability, it can meet the high, medium and low resistance test requirements of various resistors, coil wire resistance, contact connector contact resistance, PCB circuit and hole resistance and other mechanical and electrical components. G502 adopts high-performance 32-bit ARM processor and high-density SMD placement process, 4.3-inch true color TFT LCD display, intuitive and simple operation: exquisite design and advanced measurement technology, can accurately measure 0.1uQ-20MQ wide range resistance value, up to 6-digit display resolution: fast autoranging technology, comprehensive comparator and HANDLER interface, rich communication interface functions, powerful USB storage configuration, make it possible to conduct both ordinary dispersion testing and inspection, The G502 series resistance tester can easily handle the experimental research and analysis of electromechanical components, batch testing and sorting of production lines, the establishment of automatic test systems or data acquisition.
Performance characteristics:
■ 480x272 true color TFT display
■ Basic measurement accuracy: 0.05%
■ Number of readings: up to 300,000 words, minimum resistance resolution: 0.1uΩ
■ High-speed measurement: the fastest sampling rate is 100 times/second
■ Test device protection mode: normal current/low current/pulse current
■ Wide measurement range: 0.1 uΩ-20MΩ
■ Multi-grade sorting comparator (4 qualified grades, upper super, lower super)
■ File number display and file counting function are simple and large-character measurement display, convenient and easy operation mode
■ Rich communication interfaces: RS232/USB/ANDLER
■ Chinese and English optional operation interface, a variety of interface display styles
■ USB memory function: data logging/measurement settings
■ Real-time clock display
■ Parameter saving and calling: 500 groups of internal and 500 groups of external storage and invocation are supported at the same time
General specifications
|
Temperature & humidity |
C-40°C,<90%RH |
|
|
Power requirements |
voltage |
198V - 242V |
|
frequency |
47.5Hz - 63Hz |
|
|
power consumption |
≤20 VA |
|
|
Dimensions (W×H×D) |
300*120*360mm |
|
|
weight |
Approx. 4.6kg |
|
Technical parameters
|
Measurement function |
|||||
|
Basic accuracy |
0.05% |
||||
|
Basic accuracy |
|
||||
|
Resistance range |
|
||||
|
Quantum mode |
Automatic, Manual |
||||
|
Measurement end |
Four-wire, shielded | ||||
|
Measure the time |
|
||||
|
Clear |
Short circuit clearing |
||||
|
Current mode |
|
||||
|
Average times |
1-255 |
||||
|
trigger |
Internal, manual, external. bus | ||||
|
Sorting |
Lo/bin1/bin2/bin3/bin4/he | ||||
|
limit |
4 gears, absolute extremum, absolute deviation, percentage deviation | ||||
|
Compare the outputs |
LCD display/alarm Handler output signals: BIN1-BIN4, GO, NG, LO, HI, EOM, IDX | ||||
|
other |
|||||
|
Keylocks |
Yes | ||||
|
Key tone |
Switchable | ||||
|
Real-time clock |
Support date and time setting and display | ||||
|
Password function |
Multi-level password management for unlocking, system, and files | ||||
|
interface |
|||||
|
Handler |
|
||||
|
RS232C |
|
||||
|
USB flash drive storage |
|
||||
|
Parameters are saved |
500 groups internally, 500 groups externally | ||||
Ordering Information
G502
G502AC
G502BC
Test fixture: Four-end test line
USB flash drive: 16G
: next page
Shenzhen Gain KaiTa Electronics Co., Ltd.
Email：xcc0310@gkt.com.cn
Fax：0755-27882561
Address: 3rd Floor, Block A, Building B2, Anle Industrial Zone, No.172 Hangcheng Avenue, Baoan District, Shenzhen
Follow us
CopyRight © 2023 Gain KaiTa