PRODUCTS
PRODUCTS
PRODUCTS CENTER
Product Description
main feature
●Test frequency: 100(120)Hz/1KHz
●Basic accuracy: 0.2%
●Single function key, clear LED display, easy-to-operate center value setting percentage display
Specification Table
| model | 101 |
| Test parameters | |
| Main display | Inductance (L), capacitance (C), resistance (R) |
| Secondary display | Quality factor (Q), loss factor (D), resistance (R) |
| Test signal | |
| Test voltage | 0.25V/1.0V |
| Test frequency | 100Hz(120Hz),1kHz |
| Frequency accuracy | ±0.25% |
| Output impedance | Depends on different measurement gears |
| 10Ω, 1KΩ, 100KΩ, suitable for 0.25V test level (level) | |
| 10Ω, 100Ω, 1KΩ, 10KΩ, 100KΩ, suitable for 1V test | |
| Level (level) | |
| Measurement display range | |
| Main parameter | L:0.1μH～9999.9H |
| C:0.1pF～99999μF | |
| R:0.0001Ω～99.999MΩ | |
| Secondary parameter | Q:0.0001～999.9 |
| D:0.0001～9.999 | |
| Basic accuracy | 0.2% |
| Measuring speed (1KHz) | |
| fast | 6meas./sec |
| Medium speed | 3meas./sec |
| Slow | 1meas./sec |
| trigger | Internal/external (manual) |
| monitor | |
| L.C.R | 5 digits |
| Q.D.R | 4 digits |
| Equivalent circuit mode | Series Parallel |
| Applied bias | DC:0～35V |
| Correction function | Zero |
| Judgment method | Good product/bad product judgment of each test parameter |
| General specifications | |
| Operating environment | Temperature: 10°C～40°C, humidity: 10%～90%RH |
| Power consumption | Maximum 55VA |
| Power requirement | 90V～125V or 190V～250V, 48Hz～62Hz |
| weight | About 4Kg |
| Dimensions (width × height × depth) | 270×105×350mm |
: next page
Shenzhen Gain KaiTa Electronics Co., Ltd.
Email：xcc0310@gkt.com.cn
Fax：0755-27882561
Address: 3rd Floor, Block A, Building B2, Anle Industrial Zone, No.172 Hangcheng Avenue, Baoan District, Shenzhen
Follow us
CopyRight © 2023 Gain KaiTa